1. Closure Assembly
3
Strip the sheath of the uncut cable for a suitable length ≥4 ft. (1.2 m)
(Figure 1-4).
4
Cut the strength member of the cable from the stripped cable sheath to
2.4 in. (60 mm) to fix the cable (Figure 1-5).
4
04-063-93-47BE_RevA.indb 4
04-063-93-47BE_RevA.indb 4
Bare fiber
protecting sleeve
Bare fiber loose tube
Cable sheath
Figure 1-4: Strip the uncut cable
60 mm
Figure 1-5: Cut the strength member
Bare fiber
Strength member
1/31/2024 3:40:59 PM
1/31/2024 3:40:59 PM