HellermannTyton ProCut Manual De Instrucciones Original página 8

UKCA Declaration of Conformity
7 UKCA Declaration of Conformity
Manufacturer: HellermannTyton GmbH
Großer Moorweg 45
25436 Tornesch
Germany
We herewith declare, that the design and construction of the
product:
Name: ProCut
104-10010
Product type: application tool
Machine type: electronic cable tie application tool
Serial number: GA24BXXXX- GAXXBXXXX
meets the elementary safety and health requirements of the
BS rules:
Supply of Machinery (Safety) Regulations 2008
Electromagnetic Compatibility Regulations 2006
The following harmonized standards have been applied accordingly:
BS EN ISO 12100:2010, BS EN ISO 13849-1:2015,
BS EN ISO 13850:2015, BS EN ISO 14119:2013,
BS EN 61000-6-1:2007, BS EN 61000-6-3:2007/A1:2011,
BS EN IEC 63000:2018,
BS EN 55014-1, BS EN 55014-2
Tornesch, 16.02.2024
HellermannTyton GmbH
ppa.
Hagen Spiess
Head of Engineering
Note: This confirmation corresponds to a manufacturer declaration
in terms of the Machinery Regulations 2008.
Any alterations of the described product make this declaration
invalid.
8 Warranty
The warranty is in accordance with statutory requirements.
Warranty entitlement applies only in the country in which the
device was originally purchased.
Batteries, fuses and light sources are not covered by the warranty.
8
i. V.
Martin Burmeister
Safety Engineer
Betriebsanleitung_Pro_Cut_104-29001_V01_02.2024