Publicidad
Idiomas disponibles
Idiomas disponibles
3.5
Ceiling arm installation
WARNING
Risk of injury from spring arm springing up
The spring arm can open suddenly when the binding
agent is removed and cause injuries. Please remove
the binder carefully.
B
A
C
Carefully turn and remove covers "A" from joint cover "B".
Loosen the screws "C" and remove the joint covers "B"
from the transom.
D
Carefully remove the rotary connector "D".
Insert the ceiling arm into the ceiling rod.
A
After inserting the ceiling arm, first install the ring "A",
then the locking ring "B" followed by the closing ring "C".
D
Carefully insert the rotary connector "D".
B
A
C
Install joint covers "B" and screw in screws "C".
Insert covers "A" and secure by turning.
To continue with the installation of thelight head, see
Section 6.
ENG
A
B
C
A
31
Publicidad
