Put the vehicle upside down
1. Find out the main power line under the seat, insert the plug-in of the
power line into the corresponding socket of the receiver, connect one end
of the right drive motor line with the left drive motor line, and insert the
other plug-in on the right into the socket of the receiver.
PRODUCT ASSEMBLY
4
Fix the support plate
● Insert the support plate into
the car.
● Fix with screws.
(Install the other side in the
same way)
14
PRODUCT ASSEMBLY
F
Fix the steering wheel
● Remove the nut and bolt from
the steering wheel.
● Connect the wires coming from
the steering column to the wires
on the steering wheel.
● Insert the steering wheel over
the steering and secure with the
nut and bolt.
M
Fix the trunk decor
● Insert the trunk decor into the
car.
● Fix with screws.
J
Fix the tailstock
● Insert the tailstock into the car.
● Fix with screws.
15