Descargar Imprimir esta página

Parkside PDSA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 35

Pulverizador a presión recargable de 12 y 20 v

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 136
Importer
Please note that the following address is not
a service address. Please initially contact
the service centre specified above.
Replacement parts/accessories
Spare parts and accessories can be obtained at
If you have issues ordering, please use the contact form.
If you have any other questions, contact the "Service-Center" (see page 34).
Item
9
7+8+22
6
1+2+3+23 Pistol grip, complete ................................................... 91106070
11
A
Trouble shooting
Problem
Machine does
not start
Even though the
tank is full, the
device does not
spray or sprays
at a low rate
Motor stops sud-
denly
www.grizzlytools-service.eu
Description .................................................. Product no.
Carrying strap ........................................................... 91106073
Spray lance with spray nozzle .................................... 91106072
Holder for spray lance ............................................... 91106071
Screw cap ................................................................ 91106068
Possible cause
Battery (21) discharged
Battery (21) not inserted
On/off switch (17) is bro-
ken
Spray nozzle (8) complete-
ly or partially blocked
Liquid too thick and therefo-
re unsuitable
Battery (21) empty
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
GERMANY
www.grizzlytools-service.eu
Remedy
Charge the battery (observe the separa-
te operating instructions for the rechar-
geable battery and charger)
Insert the battery (see "Inserting/remo-
ving the battery")
Repair by Service Centre
Clean spray nozzle
Remove liquid, clean spray lance and
container
Charge the battery
GB
IE
35

Publicidad

loading

Este manual también es adecuado para:

361647 2007