GE 21 Manual Del Propietario Y Instalación página 14

Replacing the light bulbs.
Turning the control to the 0 (off) position does not remove power to the light circuit.
i_ i i _
Refrigerator Lights
For models with LED lights:
An authorized technician will need to replace
the LEDlight.
For models with incandescent lights:
-_ CAUTION: Light bulb_ moy
be hot.
O Unplug the refrigerator.
O To remove the light shield, grasp the
shield atthe back and pull outto release
the tabs at the back.
Rotate the shield down and then forward
to release the tabs at the front of
the shield.
After replacing with an appliance bulb
of the same or lower wattage, replace
the shield.
Plug the refrigerator back in.
NOTE: Appliance bulbs mag be ordered from
GE Parts and Accessories, 800.626.2002.
Light
Shield
Appearance may vary
Freezer Light
CAUTION: Light bulbs moy
be hot.
0
0
@
Unplug the refrigerator.
Removethe freezer basket for access.
The bulb is located at the rear of the
freezer inside a light shield.
To remove, grasp the shield at the top
and pull out to releasethe tabs at the
bottom.
After replacing with an appliance bulb
of the same or lower wattage, replace
the shield and freezer basket.
Plug the refrigerator back in.
14