GE 21 Manual Del Propietario Y Instalación página 22

Installation Instructions
INSTALLING THE REFRIGERATOR
{cont.}
LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1) Leveling legs adjust so the refrigerator is
firmlg positioned on the floor and does not
wobble.
21 Leveling legs serve as a stabilizing brake to
hold the refrigerator securelg in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
[_ Remove the grille bg removing the two Phillips-
head screws.
r_ Turn the leveling legs clockwise to raise the
refrigerator, counterclockwise to lower it.
.4L CAUTION: To °void
possible
personal injur 9 or propert 9 damage, the
leveling legsmust be firmlgtouching
the floor.
r_ Replace the base grille bg inserting the two
Phillips-head screws.
| SET THE CONTROLS
Set the controls to the recommended setting.
_ ENERGYSAVER ON
FREEZER REFRIGERATOR
0°F 37°F
PRECISE FILL OPTIONS
REMOVE PACKAGING
START ICEMAKER
(icemaker models)
A} Remove all tape, foam and protective
packing from shelves and drawers.
B) Remove the tie downs from the freezer
baskets.
Set the icemaker power switch to the I (on)
position. The icemaker will not begin to operate
until it reaches its operating temperature of
15°F (-9°C) or below. It will then begin operation
automaticallg. It will take 2-3 dags to fill the
ice bin.
NOTE:
In lower water pressure conditions, the water
valve mag turn on up to ] times to deliver
enough water to the icemaker.
22