GE 21 Manual Del Propietario Y Instalación página 27

Installation Instructions
REMOVINGTHE DOORS
(Double Door Refrigerator Models only)
IMPORTANT NOTES
NOTE: Door swing is not reversible.
• Read the instructions all the wag through before
starting.
Handle ports carefully to ovoid scratching point.
Set screws down bg their related ports to ovoid
using them in the wrong places.
Provide a non-scratching work surface for
the doors.
IMPORTANT: Once gou begin, do not move the
cabinet.
These instructions ore for removing the doors.
Unplug the refrigerator from its electrical outlet,
Emptg all door shelves, including the dairg
compartment.
TOOLS YOU WILL NEED
AdjustableWrench
3/8" and 10 mmSocket
Ratchet/Driver
MaskingTape
Thin-bladeScrewdriver
PhillipsScrewdriver
[] REMOVE THE REFRIGERATOR DOORS
[] Tape the doors shut with masking tope.
(for water dispensermodels)
Start with right-hand door first: Remove the
screw securing the center hinge cover, lift the
hinge cover and place to the side on top of the
refrigerator.
Remove_
(for water dispensermodels)
r_ Remove water coupling and power coupling.
Water Coupling
Remove the metal spring __.._.___
clip. Use a screwdriver to __
push the red plastic locking _-- / I
clip down and off. "_" I 1
Water Coupling .... _._P_-_.__
Push red c ollar I
and hold. Pull tube. \"__
!
Power Coupling
Black mark
flush with
collar assemblg
Pull apart power
coupling to
disconnect.
27