Publicidad
ASSEMBLY INSTRUCTIONS
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless
W A R N I N G
Always wear safety goggles or safety glasses with side shields when operating power tools. Failure
to do so could result in objects being thrown into your eyes, resulting in possible serious injury.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
CONNECTING THE POLES (See Figure 2)
Before using the pole saw, assembly is required. When removed from the box, there are the
three poles as shown above.
‡ Remove packaging material from cord and discard.
‡ Insert the intermediate pole into the handle pole and slide together. The tubes are egg-shaped
and will only install one way.
‡ Lower the collar on the intermediate pole to the threaded base on the handle pole and rotate
clockwise to secure.
‡ Repeat this process to attach the intermediate pole to the powerhead pole.
W A R N I N G
Failure to lock powerhead pole as directed above could result in serious injury or death.
Threaded Base
Collar
Handle Pole
Intermediate Pole
Powerhead Pole
10
Threaded Base
Collar
Fig. 2
Publicidad
