Audi 8S8.071.126 Instrucciones De Montaje página 29

– ...then twist out the claw fasteners -12- as far as they will go.
– Hook the "lugs" of the claw fasteners into the base bracket.
Note
When in the installation position, the claw fasteners -12- are a
clear distance from the support brackets.
Determining the installation position
The positioning bolts -X- and -Y- are located beneath the rubber
lips between the decorative trim and the roof frame.
Note
The illustration shows the car from the left-hand side.
A - approx. 140 mm
B - approx. 125 mm
● Clean the contact area between the vehicle roof and the roof
bars thoroughly (they should be free from dust and grease).
Installation instructions - TT Coupé 2015▶
4 Installing/removing roof bars on vehicle
Edition 07/2014
9