– Insert the claw fastener -12- over the positioning bolts -Y-
above the installation aid and slide on the claw fastener
carefully as far as it will go.
Note
The illustration shows the installation of the front roof bars.
– Push the roof bar forwards as far as it will go in the direction
of travel by moving the claw fastener -12-.
Note
The illustration shows the installation of the rear roof bars.
– Remove the installation aid.
– Perform the identical procedure on the other side of the vehi-
cle.
– Align the roof bar on the side — note the position on the roof
edge -arrow-.
Installation instructions - TT Coupé 2015▶
4 Installing/removing roof bars on vehicle
Edition 07/2014
11