Audi 8S8.071.126 Instrucciones De Montaje página 34

Installation instructions - TT Coupé 2015▶
Edition 07/2014
– Unhook the claw fasteners -12- from the installation position
and swivel downward.
– Turn bolt -13- approx. 10 times to screw in.
– Close the cover flap -16- and lock the lock with the key.
4.4 General notes
Technical data
Weight of roof bar set: approx. 6 kg (13 lbs.).
Roof load/load
To determine the roof load:
Weight of the roof bars
+ Weight of the add-on component
+ The weight of the load
= Roof load
WARNING
Never exceed
◆ the maximum permissible roof load (75 kg/165 lbs.)
◆ the gross axle weight rating
◆ the gross vehicle weight rating
⇒ Vehicle owner's manual.
of your vehicle
Maintenance instructions:
The roof bars should always be cleaned and kept in good order.
It is particularly important to remove any dirt and salt in the win-
ter.
4.5 Setting the roof bar width
Instructions for the qualified workshop if the position of the
support bracket for the relevant vehicle is not set correctly.
– Install the roof bars on the vehicle
vehicle" on page 8.
– Use a hexagon socket wrench (5 mm) to unscrew the hexa-
gon bolts -2- on the right-hand support bracket far enough
that the support bracket can be moved. The roof bar remains
on the vehicle roof during this process.
14
4 Installing/removing roof bars on vehicle
⇒ " Installing roof bars on