Publicidad
Idiomas disponibles
Idiomas disponibles
Deactivation
2. Press the "-" symbol. The "P" is no longer displayed. The Powerboost function
is deactivated. The hotplate returns to heat setting "9".
In certain circumstances,
the Powerboost
function
will automatically
switch
off, to protect the hob's internal electronic
components..
Timer
Cooking timer
Set the timer as follows
Once the cooking
time
has elapsed
Changing the time
Note
Use the cooking timer to set times up to 99 minutes. The timer is independent of
any other settings.
1.
Touch the - and + symbols simultaneously and repeatedly until the z_ indicator
flashes. In the timer display 00 flashes.
2.
Touch - or + to set the cooking time:
÷ symbol -- 10 minutes
- symbol -- 5 minutes.
3.
Set the time by pressing ÷ or -.
Press the + symbol to set a longer time.
Press the - symbol to set a shorter time.
The timer will start to count down after a few seconds.
The timer beeps. ,_,,_,"_'_
flashes in the timer display. The f_ indicator flashes. Touch any
key. The displays go out and the beep shuts off.
Touch the - and ÷ symbols simultaneously and repeatedly until the z_ indicator
flashes.
The timer display flashes
Use - or ÷ to change the time.
After a power outage, this function is cancelled. The mode must be reset.
Turn off the display beep
The display beeps when a key is touched. This setting can be turned off:
Turn the cooktop on at the power key.
1.
Set all elements to temperature level 3.
2,
Using the "-" symbol, set each of the hotplates in turn to the "0" power level,
from right to left (see figure).
3.
Touch the power key for at least 5 seconds. The display will beep to confirm the
change.
To turn the display beeps back on again, repeat the steps above.
16
Publicidad
