Dometic CFF18 Instrucciones De Uso página 21

CFF12, CFF18, CFF20, CFF35, CFF45, CFF70DZ
A
NOTICE! Damage hazard
CFF35, CFF45: If the lid has been forced too far, follow the steps
described in the chapter "Lid past built-in stop (CFF35, CFF45 only)" on
page 31.
Removing the cup holder (CFF12 only) (fig. 9, page 9)
➤ Lift the cup holder out to access an convenient storage area.
Removing the basket (CFF35 & CFF45 only) and divider (CFF18
only)(fig. 0, page 10)
A
NOTICE! Damage hazard
Removing the basket with the lid open may scratch the lid and deform
the basket. We recommend to remove the lid before removing the
basket.
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
1. Switch on the cooler.
2. CFF12, CFF18, CFF20, CFF35, CFF45: Press the "SET" button (fig. 3 5,
page 5) twice.
CFF70DZ: Press the "SET" button (fig. 3 5, page 5) three times.
3. Use the "UP +" (fig. 3 7, page 5) or "DOWN –" (fig. 3 6, page 5) buttons to
select Celsius or Fahrenheit.
✔ The selected temperature unit then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
5.2 Saving energy
• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
• On a regular basis, make sure the lid seal still fits properly.
EN
Operation
21