Starting the watch
Your watch 5365 is a selfwinding mechanical watch.
English
When first starting your watch, we recommend winding
the watch manually to reach a certain portion of the
reserve, and then the selfwinding system will complete
the power reserve while you are wearing the watch.
Crown in position X1. This position enables the movement
to be wound by hand hand when the watch has stopped.
Before performing any other operation, wind it by turning
the crown upwards
20 to 30 times.
Thereafter, if the watch is worn on the wrist, it winds itself
and reaches its full power reserve automatically.
If it is not worn after being fully wound, the watch will stop
after about 80 hours.
Notice
When the watch is fully wound, the oscillating weight may
stop moving. It will start moving again when the watch has
unwound a little.