Publicidad
Idiomas disponibles
Idiomas disponibles
other than the purpose it is intended to.
• The appliance has undergone strict in-
process tests and inspections under
normal operation conditions. Some
water marks might remain in the
appliance. These marks will disappear
after the first use.
• The appliance must not be used by
children, or people lacking the pertinent
knowledge about the correct use.
• Consider
recommendations about the operation.
Exceeding
the
capacity
may
operation of the unit.
• A small amount of detergent will be
enough for light or normal soil level.
Consider the dosage recommendation
provided by the manufacturer.
• Keep in mind that water pressure can
affect the normal operation of the
product, whether it is high or low.
Before the first use
• Remove all the plastic packaging and
any other packaging items
• Take
out
all
accessories supplied from the drum.
• Adjust the levelling feet so that the
product is completely levelled.
• As mentioned in the assembly and
installation
transport bolts from the back part.
• Note: Keep in mind that some water
may be drained during the first use. If
there is some residual water after the
performance test, this is something
normal.
Control panel (see picture 09 on page 7
17. Program knob: Select the program
according to the type and soiling
level of the laundry.
18. Digital panel: The display shows
the information of the current
cycle and the remaining time, or
an information code in case of a
problem.
19. On/Off button : Turn the power on
and off. When finished, press on/off
the
manufacturer´s
maximum
loading
affect
the
correct
the
objects
section,
remove
to turn off the power. If you turn on
the washer and do not use it for 10
minutes, it will automatically turn
off.
20. Start/Pause button: Press to start/
pause operation. Press once to start a
cycle. When paused, you can change
the settings and options of the cycle.
To resume the paused operation,
press the button again.
21. Delay button: Press to select the end
of cycle time. Press repeatedly to
display the available delayed start
options and select the desired time (3
to 24 hours in one-hour increments).
22. Speed button: Press to change the
spin speed of the current cycle. The
available spin speed depends on the
cycle. The selected spin speed is
shown on the display.
23. Temperature button: Press to change
the water temperature for the current
cycle. The available temperature
range depends on the cycle. The
selected temperature appears on the
display.
and/or
Delayed Start function:
You
can
automatically finish the wash at a later
time by selecting a delay from 3 to 24 hours
the
(in 1-hour increments). The time displayed
indicates the time at which the cycle will
end.
To activate the delayed start function:
• Select a cycle. If necessary, change
the cycle settings to match the desired
wash.
• Press the Delayed Start button until the
)
desired wash end time is set.
• Press the Start/ Pause button.
• The appropriate indicator will light
on the display and the clock will run.
To cancel the delayed start, restart the
washer by pressing the On/ Off button.
Steam wash (steam icon)
Your
washing in intensive cycles such as
program
the
washer
has
EN
washer
to
steam-assisted
79
Publicidad
