Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
before cleaning.
• Open the drawer and add the liquid
bleach in the main compartment.
• Do not add detergent to prevent
excessive foam.
• Close the drawer.
• Check the inlet pipes and make sure the
water flow is open.
• Press the On/Off button.
• Rotate the program button to select the
"Tub cleaning" program.
• Press the Start/Pause button.
• The programs start running after the
door is locked.
• When the program is finished, a
warning sound will be heard.
• When the program is finished, dry
the inside of the washing machine to
prevent the door from deforming.
• If there are children in the house, do not
open the door for too long.
Program: Spin
• The machine will not wash or rinse, it
will only centrifuge.
• Open the door, put in the clothes and
close the door.
• Press the On/Off button.
• Turn the program selection knob to
select the "Spin" program.
• You can adjust the speed by pressing
the "Speed" button.
• Press the Start/Pause button and start
washing.
• Start draining the water and centrifuge
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
• During the process, the actual spin
speed may not match the program
speed, which is because the washing
machine adjusts the speed according to
the amount of laundry.
• There may be a rhythmic buzzing sound
during spinning, which is normal.
86
Program: Rinse+Spin
• The washer will not wash, it will only
rinse and centrifuge.
• Preparations:
• Open the door, put in the clothes and
close the door.
• Press the On/Off button.
• Turn the program selection knob to
select the "Rinse+Spin" program.
• The wash program will be selected
automatically.
• Press the Start/Pause button and start
washing.
• When the program is finished, a
warning sound will be heard.
• If you want to change the current
settings during the washing process,
first press the "Start/Pause" button and
stop the wash, change the settings as
needed and then press the same button
again to restart the wash.
• The
centrifugation
selected, but the temperature cannot be
adjusted.
CLEANING AND MAINTENANCE
Follow these maintenance and cleaning
indications to prevent your appliance from
deteriorating over time and use:
• Wait until the appliance is disconnected
and not hot to carry out any cleaning or
maintenance activity.
• Do not use any abrasive cleaning product
or scrubbers, or products containing lye,
acid, chloride or solvents. Do not use
either steam cleaners or high pressure
cleaners.
• Do not use scrubbers or hard sponges.
• Be careful when cleaning the control
panel surface, if humidity infiltrates
inside there is the risk of electrical
shock.
• Remove dirt from inside the appliance
with a wet cloth.
• Clean the door gaskets, the front panel
and the control panel regularly using
a wet cloth and a little bit of cleaning
product specific for washing machines.
speed
can
be
Publicidad
