Change-Over Of The Chain-Off Thread Rolling-In And The Runstitching (Sensor Blind) - JUKI MO-6 14/LB-6 Serie Manual De Instrucciones

6. Change-over of the chain-off thread rolling-in and the runstitching
(Sensor blind)
By opening/closing the blind of the material end sensor, the sewing machine can be used either for the
chain-off thread rolling-in or for the runstitching.
Opening/closing the blind is of rotary type.
Sensor blind
In case of closing the blind of the material end sensor (runstitching), thread tension release
at the start of sewing and soft start operate at the time of the first sewing after turning ON the
power and sewing after fully depressing the back part of the starting pedal.
It is possible to avoid the operation by setting the number of stitches of thread tension
release at the start of sewing and the number of stitches of soft start to "0".
Sensor blind
1) Blind "open"
The sewing machine can be used for the chain-off
thread rolling-in.
(When the material is not placed on the sensor,
the machine does not start even when depressing
the front part of the starting pedal.)
2) Blind "close"
The sewing machine can be used for the
runstitching.
(Regardless of the material, the machine starts.)
43