Publicidad
130524
%. OPERATION OF THE DEVICE
1. Item data setting
Set each item following the procedure described below.
Setting of the
pattern No.
(1) Turn ON the power switch
Pattern No. of the item selection lights up, and the pattern No. is indicated on the data display.
(2) Setting of the pattern No.
PATTERN No.
X-SCALE
Y-SCALE
SPEED
COUNTER
WINDER
THREAD
CUTTER TEMP
Service pattern
No.
Switch design on the control box may be different from each other in accordance with the models.
Setting of the X
scale
Shape
□ 50x30 mm
P=3.0
P=3.0 ø30
P=3.0
P=3.5 ø30
P=3.0
Sewing cannot be performed
since this No. is for the pattern
for adjusting the amount of oil in
the hook.
Setting of the
Setting of the Y
max. sewing
scale
speed limitation
1) Press the
NO".
2) Press the
No. 1 to 99 on the display.
In case the pattern is not prepared, indicate the ser-
vice pattern No. 51 to 55 inputted beforehand at the
time of delivery. Since the intermediate presser is not
provided, prepare the feeding frame which matches
the sewing pattern.
– 6 –
key to indicate the item "Pattern
or
key to indicate Pattern
Publicidad
Capítulos
