Personnel Qualifications; General Instructions - Aventics HF03 Instrucciones De Servicio

AVENTICS | HF03/HF02 | 1987765472–BDL–001–AB
2.4

Personnel qualifications

Assembly, disassembly, commissioning and operation require
basic electrical and pneumatic knowledge, as well as knowledge
of the applicable technical terminology. Assembly, disassembly,
commissioning, and operation may therefore only be carried out
by qualified electrical or pneumatic personnel or an instructed
person under the direction and supervision of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures, due to
their professional training, knowledge, and experience, as well
as their understanding of the relevant conditions pertaining to
the work to be done. Qualified personnel must observe the rules
relevant to the subject area.
2.5

General instructions

W
Observe the regulations for accident prevention and
environmental protection.
W
Observe the safety instructions and regulations of the
country in which the product is used or operated.
W
Only use AVENTICS products that are in perfect working order.
W
Follow all the instructions on the product.
W
Persons who assemble, operate, disassemble, or maintain
AVENTICS products must not consume any alcohol, drugs,
or pharmaceuticals that may affect their ability to respond.
W
To avoid injuries due to unsuitable spare parts, only use
accessories and spare parts approved by the manufacturer.
W
Comply with the technical data and ambient conditions
listed in the product documentation.
W
If unsuitable products are installed or used in safetyrelevant
applications, this may result in unintended system
operating states that may lead to injuries and/or equipment
damage. Therefore, only use a product in safety-relevant
applications if such use is specifically stated and permitted
in the product documentation.
45
For your safety