Jøtul C 24 Manual De Instalación página 16

english
Fig. 25
B
20. Pull the adapter (Fig. 25A) down firmly and tighten the nuts
(Fig. 25B) alternately to ensure the adapter is even. If needed,
use cement to seal between the flue pipe and adaptor. Put
the frame on (Fig. 12).
21. Refit all loose parts that were removed from the product.
16
A B
4.12 Performance check
Once the product has been assembled, always check the control
handles. These should move easily and work in a satisfactory
manner.
Fig. 26
Lukket/Closed
C
Lukket/Closed
The Jøtul C 24 is equipped with the following operating options:
Air vent (Fig. 26A)
Left position closed
Right position fully open
Ignition vent (Fig. 26B)
Left position closed
Right position fully open
Åpen/open
A
B
Åpen/open