Jøtul C 24 Manual De Instalación página 9

Fig. 5
4. Remove the lock catch on the right-hand side of the product
and attach it to where the door hinges were on the left-hand
side.
Fig. 6
C
A
A
5. Remove the handle (Fig. 6B) from the door lock. Loosen the
4 screws (Fig. 6A) holding the door lock and hinges in place.
Scrape any traces of glue off the surfaces (Fig. 6C).
o
180
B
Fig. 7
6. Rotate the parts of the door lock axis by
Fig. 8
A
7. Install the door lock and hinge on the opposite side (Fig.
8. Place the door on the product. Note: the position of the door
can be adjusted slightly by loosening the screws (Fig. 4A) a
little. Tighten the screws.
9. Refit the handle.
A
180°
180°
180°
180°.
A
english
8).
9