Putting Into Operation; Equipping The Torch - Abicor Binzel ABITIG 9 Instructivo De Uso Y Mantenimiento

Valve torch SR/ABITIG

4 Putting into operation

4.1 Equipping the torch

1
5
1 Torch body
2 Gas nozzle
Fig. 1 Equipping the torch
®
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power source and close off the gas supply.
• Pull the mains plug.
NOTE
• The system may only be put into operation by trained personnel.
CAUTION
Risk of injury
Puncture wound may be puncture caused by sharpened electrode.
• Do not reach into the danger zone.
• Wear protective gloves.
Equip the torch neck according to one of the following figures:
Step 1 Steps 2-3
4
3 Tungsten electrode
4 Back cap
4 Putting into operation
Step 4
3
5 Collet
2
EN - 5