Putting Into Operation - Abicor Binzel ABITIG Little SL Serie Instructivo De Servicio

®
ABITIG Little SL

4 Putting into operation

DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect all electrical connections.
DANGER
Risk of injury and device damage when handled by unauthorised persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorised persons.
• Only qualified personnel are permitted to perform work on the device or system.
NOTICE
• Note of the following instructions:
 3.1 Technical Data on page EN-5
BAL.0285.0 • 2019-06-19
4 Putting into operation
EN - 7