Basic Cleaning - Abicor Binzel ABITIG Little SL Serie Instructivo De Servicio

®
ABITIG Little SL
Sharpening the tungsten electrode
Sharpening the tungsten electrode depends on wear and must therefore be carried out when
required.
Fig. 2
To sharpen the tungsten electrode, use a sharpening device with a diamond wheel. In doing so,
observe the following:
• The point is sharpened longitudinally through the center axis.
• Automatic regulation of the tungsten electrode drive by gravity.
• Can be set for all electrode diameters.
• Offers continuous adjustment of the angle.

8.1 Basic cleaning

We recommend basic cleaning once a week. Under extreme working conditions, basic
cleaning must be carried out. The type and frequency of cleaning shall be determined and
established by the system operator of the welding system.
9 Disposal
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards and guidelines.
BAL.0285.0 • 2019-06-19
Sharpening the tungsten electrode
9 Disposal
EN - 13