Recording On A Connected Component; Connecting External Antennas - Sony MHC-GN880 Manual De Instrucciones

Recording on a connected
component
Making a digital recording on
an MD
1
Connect an optical cable.
See "Hooking up optional components" on
page 33.
2
Start recording.
Refer to the operating instructions provided
with the connected component.
Note
When making a digital recording from the system to an
optional component (MD deck) connected to the CD
DIGITAL OUT jack, start the optional component
recording in advance.
Connecting external
antennas
Connect an external antenna to improve the
reception.
FM antenna
Connect an optional FM external antenna. You
can also use the TV antenna instead.
Ω
AM antenna
Connect a 6 to 15 meter insulated wire to the
AM antenna terminal. Leave the supplied AM
loop antenna connected.
Ω
Insulated wire
(not supplied)
GB
35