Recording On A Connected Component; Connecting External Antennas - Sony Game Sync Mixing FST-ZX8 Manual De Instrucciones

Recording on a connected
component
To Do this
Make a digital 1 Connect the optional optical
recording from cable from CD DIGITAL OUT
an audio CD onto jack to digital audio input of the
a connected MD MD deck.
deck See "Hooking up optional
components" on page 33.
2 Start recording.
Refer to the operating
instructions provided with the
connected MD deck.
Make an analog 1 Connect the optional audio
recording from cords from VIDEO/MD OUT
disc, tape, radio, L/R jacks to the analog audio
connected input of the MD deck.
turntable or video See "Hooking up optional
game player onto components" on page 33.
a connected MD
2 Start recording.
deck
Refer to the operating
instructions provided with
connected component.
Note
You cannot record from an MP3 audio track digitally.
When you record from an MP3 audio track to a
connected MD deck, make an analog recording on MD
deck.
Connecting external
antennas
Connect an external antenna to improve the
reception.
FM antenna
Connect an optional FM external antenna. You
can also use the TV antenna instead.
Ω
AM antenna
Connect a 6 to 15 meters insulated wire to the
AM antenna terminal. Leave the supplied AM
loop antenna connected.
Ω
Insulated wire
(not supplied)
35 GB