Playback Operation; Cue; To Memorize The Cue Point; Stutter Play With The Cue Key - Tascam CD-X1700 Manual Del Usuario

English

3-1. CUE

The CD-X1700 can memorize the play start point
as a cue point. If the cue point is memorized,
pressing the CUE key locates the unit to the cue
poin.

To memorize the CUE point

There are two ways to store the cue point.
Pressing and holding the SHIFT key then pressing
CUE selects the method for the CUE key's
operation.
: Last play start point is stored as the CUE
point.
: Pressing the CUE key when unit is paused
stores the current point as the cue point.

Stutter play with the CUE key

When unit is paused at the cue point, the unit will
play when this key is pressed, and enter pause
mode when CUE is released.
If the PLAY key is pressed during CUE playback,
the unit will go into normal play mode.

3-2. CUE 1-3

The CD-X1700 can have another three cue points
stored with the CUE 1-3 keys.

To memorize the CUE 1-3 points

1. Find the desired point.
2. Press the SET key. The parameter display shows
.
3. Press the desired CUE key.
12
TASCAM CD-X1700 DUAL CD PLAYER

3. Playback operation

When the CUE key has the stored point, the CUE
key lights. The stored cue point cannot be erased
but can be overwritten.
NOTE
... When the unit is paused and the
indicator in the LCD lights, pressing the
SET key then pressing the CUE 1-3 key
starts the unit automatically.
... When the unit is paused and the
indicator in the LCD doesn't light, press-
ing the SET key then pressing the CUE 1-
3 key flashes the pressed CUE 1-3 key
three times then lights.
... For three seconds after storing the cue
point, you cannot store another cue
point.

Stutter play with the CUE 1-3 keys

When the unit is paused at the cue 1-3 point, the
unit will play when the appropriate CUE 1-3 key is
pressed, and enter pause mode when CUE 1-3 is
released.
If the PLAY key is pressed during CUE playback,
the unit will go into normal play mode.

3-3. Flash Start

The CD-X1700 has a flash start function that can
be used with the CUE 1-3 keys.
When the flash start function is activated (when the
indicator in the LCD lights), pressing the
CUE 1-3 key enables flash start.
NOTE
... When the
doesn't light, the unit is back in cue
mode. In this mode, pressing the CUE 1-
3 key locates the stored cue point then
the unit pauses.
indicator in the LCD