Mp3 File Playback; Preset Menu - Tascam CD-X1700 Manual Del Usuario

4. More advanced operation

4-13. MP3 file playback

The CD-X1700 can play the MP3 file which is
recorded as following specific format.
Disc format:
Number of directories: up to 254
Number of files:
File format:
Bit rate:
Sampling frequency:
File extension:
NOTE
... If the disc is recorded with multi session
way, the CD-X1700 can read the files in
first session area only.
... Variable bit rate (VBR) format is not sup-
ported.
MP3 playback function does not support following
functions.
CUE and CUE 1-3
Flash start
A-B Loop
Search
Reverse play
Track memory
Total remain time display
Remain time display
Time address bar display
NOTE
... Backward direction of the scratching can
be performed up to 7 seconds.
Playing the MP3 file
1. Insert the CD-ROM which including the MP3
files.
2. Pressing the SKIP key selects the MP3 file.
3. Press the PLAY/PAUSE key.
Pressing and holding the SHIFT key then pressing
the SKIP key skips the directory.
ISO9660 Level 1
up to 255
MPEG 1 audio layer 3
32kbps to 190kbps,
Constant Bit Rate
44.1KHz, Stereo
mp3, Mp3, mP3, MP3
NOTE
... Since the CD-X1700 does not support
the text display, the text information
which are included in the ID tag are not
displayed. File number is shown in the
TRACK number area and directory num-
ber is shown in the parameter display.
When parameter display
directory number, DIR indicator will
light.

4-14. Preset menu

Pressing and holding the SHIFT key then using the
Jog wheel selects the preset menu.
Select the preset menu then press the ENTER key,
the LCD shows the preset menu and its parameter.
Set the parameter with the Jog wheel.
Pressing the ENTER key confirms the new
paramete.
Pressing any other key exits the preset operation.
TASCAM CD-X1700 DUAL CD PLAYER
English
shows the
23