Memory Data; Recall - Tascam CD-X1700 Manual Del Usuario

4. More advanced operation

Memory data

... l DISC ID
... CUE 1-3 points
... LOOP mode
... Tempo data
... Key Original On/Off
... Brake On/Off
... Key value
... Sampling points
NOTE
... Sampling points for the MP3 file cannot
be memorized

Recall

1. Select the memory bank by pressing and holding
the SHIFT key
TEMPO/BANK key. If there is a track memory
data of selected track in the current selected
memory bank (A to E), the "M" indicator in the
LCD lights.
2. Enter the recall mode by pressing and holding
the SHIFT key
FLASH/RECALL key.
memory data for the current selected track, its
memory number is shown in the LCD.
3. When track memory number is shown in the
LCD, pressing the ENTER key recalls the track
memory data.
The CD-X1700 can recall the track (song) from the
track memory data.
... CUE point
... LOOP A/B points
... Play mode
... Tempo Range
... TAP value
... Brake Time
... Time mode
... Effect setting
then pressing the
then pressing the
If there is a track
1. Select the memory bank by pressing and holding
the SHIFT key
TEMPO/BANK key.
2. Enter the recall mode by pressing and holding
the SHIFT key
FLASH/RECALL key. Using the Jog wheel to
select the desired track memory number.
3. When track memory number is shown in the
LCD, pressing the ENTER key recalls the track
from the track memory number.
NOTE
... Cue and loop points can be memorized
and/or recalled. However, just after the
recall operation, seamless start from the
cue or loop points can't be performed
because there are no data in the RAM
buffer just after the recall operation.
Once playing from cue points (CUE 1-3)
and/or loop start point for a few second,
flash start and/or seamless looping can
be performed.
TASCAM CD-X1700 DUAL CD PLAYER
English
then pressing the
then pressing the
19