Reverse Play; Sampler; Sampling; Using The A-B Loop As A Sample Source - Tascam CD-X1700 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. More advanced operation

4-5. Reverse play

The CD-X1700 features the reverse play function.
Pressing the REVERSE key changes playback
direction. When playback is reversed, the
REVERSE key will light.
NOTE
... More than 3 seconds after pausing,
reverse play cannot be performed.
... In the reverse play mode, flash start, cre-
ating the looping, and auto cue func-
tions do not work.

4-6. Sampler

The CD-X1700 includes eight seconds sampler on
each player.

Sampling

NOTE
... Make sure the IN/ß and OUT keys are
not lit. If the sampler has sampled audio
data, erase the audio data first, then
record the audio again.
1. Press the IN/ß key when playing or pausing.
IN/ß key will light and SAMPLE and OUT key
will start flashing.
2. Press the OUT key when playing or pausing.
SAMPLE key will go off and both IN/ß, and
OUT keys will light.
NOTE
... If eight seconds elapse, or if the end of
the track is reached without pressing the
OUT key, the end point of the sample
will automatically be set at that point.

Using the A-B loop as a sample source

When you have set up an A-B loop, you can press
and hold the OUT key and press the B key to set A
point of the loop as the start point of the sampler,
and B point of the loop as the end point of the
sample (you cannot operate this when loop
playback is activated).
If the A-B loop is over 8 seconds length , the first
8 seconds will be take as the sample.

Play the sampler

When IN/ß, and OUT keys light, pressing the
IN/ß key starts the sampler from the beginning.

Stop the sampler

When sampler is playing, pressing the OUT key
stops the sampler.

Erasing the recorded sample

Pressing
both
IN/ß
simultaneously erases the recorded sample. At this
time, IN/ß and OUT keys light off.
TASCAM CD-X1700 DUAL CD PLAYER
English
and
OUT
keys
17

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido