Programmed Play; Create The Program; Edit Program - Tascam CD-X1700 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. More advanced operation

4-12. Programmed Play

The CD-X1700 features up to 30 tracks of program
play function. Program itself is maintained even if
power is turned off, and if CD is not ejected,
program list will be backed up.
NOTE
... If the disc is ejected, program will be
erased.
... Once one of the CUE 1-3 key is pressed,
programmed play will be cancelled.

Create the program

1. Enter the program edit mode by pressing and
holding the SHIFT key then pressing the PLAY
MODE/PGM key.
2. Program number is shown in the parameter
display. Select the desired track with the track
skip keys.
3. Go to next program number by pressing the
ENTER key or using the Jog wheel.
4. Repeat 2-3.
5. Exit the program edit mode by pressing and
holding the SHIFT key then pressing the PLAY
MODE/PGM key.

Edit program

1. Enter the program edit mode by pressing and
holding the SHIFT key then pressing the PLAY
MODE/PGM key.
2. Program number is shown in the parameter
display. Select the desired program number with
the Jog wheel.
3. Select desired track with track skip keys.
4. Repeat 2-3.
5. Exit the program edit mode by pressing and
holding the SHIFT key then pressing the PLAY
MODE/PGM key.
TASCAM CD-X1700 DUAL CD PLAYER
English
21

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido