Notes On Using The Operating Manual - Waeco PerfectView LCD250 Instrucciones De Montaje

PerfectView LCD250
Please read this manual carefully before installing and starting up the device and
store the manual in a safe place. If the device is resold, this operating manual must
be handed over to the purchaser along with it.
Contents
1 Notes on using the operating manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2 Safety and installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6 General information on the electrical connections . . . . . . . . . . . . . . . . . . . . . 37
7 Mounting the camera and monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
8 Using the LCD-monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
9 Cleaning and maintaining the LCD monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 47
10 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
11 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
12 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
1

Notes on using the operating manual

Caution!
a
Safety instruction: failure to observe this instruction can cause material damage
and impair the function of the device.
Caution!
e
Safety instruction relating to a danger from an electrical current or voltage. Fail-
ure to observe this instruction can cause material damage or personal injury and
impair the function of the device.
Note
I
Supplementary information for operating the device.
Action: this symbol indicates that action is required on your part. The required action
is described step-by-step.
This symbol indicates the result of an action.
Fig. 1 5, page 3: this refers to an element in an illustration. In this case, item 5 in
figure 1 on page 3.
Please observe the following safety instructions.
Notes on using the operating manual
31