Placement of speakers
Use only the supplied speakers.
You can cause damage to the system and decrease the
sound quality if you use other speakers.
Note:
•
Put the speakers on a flat safe surface.
•
These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other equipment easily influenced
by magnetism.
•
When you play at high levels for a long period, it can cause
damage to the speakers and decrease the life of the
speakers.
•
Decrease the volume in these conditions to prevent
damage:
–
When the sound is distorted.
–
When you adjust the sound quality.
•
More than one person is required to move, tilt or carry the
speakers.
CAUTION!
• Use the speakers only with the recommended
system. If not, you can cause damage to the
amplifier and speakers and can cause a fire.
Consult an approved service personnel if damage
occurs or if there is a sudden apparent change in
performance.
• Do not modify the speaker or speaker wires as
this can cause damage to the system.
• Do the procedures included in these instructions
when you attach the speakers.
• Do not touch the speaker cone's reverberating
surfaces:
– This may damage the speaker cone.
– The speaker cone may be hot.
• Be careful when babies or children are near.
• Do not stack the speakers.
SC-MAX8700
•
Do not put a hand or foreign object into
the port holes as this can cause personal injury
and damage to the speaker.
SC-MAX8700
█
Attaching the speaker feet
For stability and to prevent damage to the floor,
attach the speaker feet to the bottom of the
speakers.
Preparation
Put a protection layer below the speakers to
prevent scratches.
The left and right speakers are the same.
Note:
Keep your speakers more than 10 cm (4") from the main unit
to prevent vibration effects from speakers and for ventilation.
SC-MAX4700
Put the speakers so that the tweeter is on the outside.
Note:
Keep your speakers at least 10 mm (
system for proper ventilation.
Speaker feet
Protection layer
(not supplied)
Tweeter
13
") away from the
32
5
5