Recording With Analog (Line) Input (Line Cable Required) - Sony MZ-B100 Manual De Instrucciones

Recording with analog (line)
input (line cable required)
Connect the recorder with a line cable
(not supplied) to make analog recording.
The sound will be sent from the
connected equipment as analog signal but
will be sent recorded digitally on the disc.
CD player,
cassette recorder,
etc.(source)
to LINE OUT
L (white)
Line cable (RK-G129HG,
not supplied)*
to LINE IN
(OPTICAL)
∗ Use the connecting cords without an
attenuator. To connect to a portable CD
player having a stereo mini-jack, use the
RK-G136HG connecting cord (not
supplied).
1
Insert a recordable disc.
2
Press REC MODE repeatedly until
"STEREO", "LP2", "LP4", or
"MONO" lights up in the display.
For details on the recording mode, see
"Recording for long times" (page 16).
R (red)
REC
indicator
REC
MODE
zREC
3
Press zREC.
"REC" appears in the display, the
REC indicator lights up, and the
recording starts.
4
Play the source sound.
For other operations on recording, see
"Recording an MD right away!"
(page 11).
Note
A track mark is added at the point where you
press the XPAUSE button again to resume
recording while pausing recording; thus the
remainder of the track will be counted as a new
track.
21
-GB