Checking The Remaining Time Or The Recording Position - Sony MZ-B100 Manual De Instrucciones

Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.
Items related to the group function appear
when you play and then stop a track with
group settings.
REC indicator
1
Press DISPLAY while the recorder is
recording or stopped.
Each time you press the button, the
display changes as follows.
A
B
C
While recording
A B
Track Elapsed time —
number
Track Remaining
number time for
recording
Current Current time Clock
date
26
-GB
DISPLAY
C
RecRemain
In stop mode
A B
Track Elapsed
number time
Track name Remaining
time for
recording
Group name Remaining
time in the
group
Disc name Remaining
time after
the current
location
Current date Current
time
Note
Items may appear differently or may not be
selectable, depending on the group mode's on/
off status, the recorder's operating status, or the
recorder settings.
To know the recording
condition
The REC indicator lights up or flashes
according to the recording condition.
Recording
condition
While recording
Recording standby flashes
Less than 3
minutes'
recording time
available
A track mark has
been added (when
controlling by the
recorder only)
z
If you want to check the playing position or
track name while playing, see page 29.
C
—
RecRemain
GP Remain
AllRemain
Clock
REC indicator
lights up
flashes slowly
goes off
momentarily