Siemens SINUMERIK 840D Manual De Usuario página 358

11
Ejemplos
11.2 Adaptación de datos a una máquina concreta
840 D 840 D
NCU 571 NCU 572
NCU 573
;N13 DEF NCK REAL _KB[3,7]
N14 DEF NCK REAL _CM[8]=(60,2000,1,0.005,20,4,10,0)
N15 DEF NCK REAL _MFS[6]
N20 DEF NCK BOOL _CBIT[16]=(0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0)
N30 DEF NCK STRING[8] _SI[3]=("",4,"")
N40 DEF CHAN INT _EVMVNUM[2]=(10,10)
N41 DEF CHAN REAL _SPEED[4]=(50,1000,1000,900)
N50 DEF CHAN BOOL _CHBIT[20]=(0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)
N60 DEF NCK STRING[32] _PROTNAME[2]
N61 DEF NCK STRING[80] _HEADLINE[10]
N62 DEF NCK INT _PROTFORM[6]=SET(60,80,1,5,1,12)
N63 DEF NCK CHAR _PROTSYM[2]
N64 DEF NCK STRING[100] _PROTVAL[13]
N65 DEF NCK INT _PMI[4]
N66 DEF NCK INT _SP_B[20]
N67 DEF NCK STRING[12] _TXT[100]
N68 DEF NCK INT _DIGIT
...
M17
%_N_GUD5_DEF
;$PATH=/_N_DEF_DIR
;27.04.01 Adaptación a máquina_1
...
N40 DEF CHAN REAL _EV[10]
N50 DEF CHAN REAL _MV[10]
...
N99 M02
1) Los caracteres y cifras en negrilla se han
modificado frente al estado de suministro
11-358
810 D 840Di
1)
1)
1)
SINUMERIK 840D/840Di/810D Manual de usuario Ciclos de medida (BNM) – Edición 11.02
11
12.97
09.01
© Siemens AG 2002 All rights reserved.