Paslode CR175C Manual De Instrucciones página 12

Quicklode™ Fuel Cartridge
Inserting Fuel Cartridge
A.
When loading a fuel cartridge, lift the tool off of the work
surface so the work contact element (WCE) is not depres-
sed. Press forward at the back of the actuator cover and
pivot outward to open. The cover will swing out of the way.
1. Press Forward d
2. Pull Out
B. Lift the fuel cartridge adaptor and insert the Quicklode
fuel cartridge into the tool.
11
C. Release the adaptor so it is centered on the fuel
cartridge.
D. Close the actuator cover to complete the loading of fuel
in the Cordless Roofing Nailer. Do this by swinging it up
and over the fuel cartridge, and pushing down until the
actuator cover snaps into position.