Applications; Preparation Before Operation - Hitachi Koki C 10FCD Manual De Instrucciones E Instrucciones De Seguridad

English

APPLICATIONS

Wood, plywood, color board, soft fabric board, hard board similar materials and aluminum sash.

PREPARATION BEFORE OPERATION

Make the following preparations before operating the power tool:
1. Installation
19-1/16" (484 mm)
3/8" (10 mm), 4 Holes
16-27/32" (428 mm)
Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.
Select 5/16" (8 mm) diameter bolts suitable in length for the thickness of the work bench.
Bolt length should be at least 2" (50 mm) plus the thickness of the work bench.
For example, use 5/16" (8 mm)
The extension stay attached to the rear of the base (see Fig. 2) helps stabilize the power tool.
10
Base
Fig. 4
3" (75 mm) bolts fot a 1" (25 mm) thick work bench.
5/16" (8 mm) Bolt
5/16" (8 mm) Nut Work Bench