Playback Menus - JVC GR-D395U Manual De Instrucciones

Playback Menus

[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
According to the menu access explanation on
page 31, select "SOUND MODE" or
"NARRATION" from the Menu Screen and set it
to the desired parameter.
The setting below are effective only for video
playback except "BRIGHT" and "REC MODE".
The parameters (except "OFF" in ON SCREEN,
SOUND MODE and NARRATION settings) are
the same as in the description on page 32.
REC MODE
Allows you to set the video recording mode (SP
or LP) depending on your preference. It is
recommended you use "REC MODE" in VIDEO
Menu when using this camcorder as a recorder
during dubbing. ( pg. 42, 43)
*SP indicator does not appear on the screen.
SOUND MODE
[STEREO ]: Sound is output on both "L" and
"R" channels in stereo.
SOUND L : Sound from the "L" channel is
output.
SOUND R : Sound from the "R" channel is
output.
NARRATION
[OFF]: Original sound is output on both "L" and
"R" channels in stereo.
ON: Dubbed sound is output on both "L" and "R"
channels in stereo. (
MIX: Original and dubbed sounds are combined
and output in stereo on both "L" and "R"
channels.
[SP]* / LP
pg. 45)
MENUS FOR DETAILED ADJUSTMENT
BRIGHT
pg. 17, "Brightness Adjustment Of The
Display"
DATE/TIME
[OFF]: The DATE/TIME does not appear.
ON: The DATE/TIME is always displayed.
ON SCREEN
● When set to "OFF", the camcorder's display
disappears.
TIME CODE
pg. 20, "Time Code"
EN
OFF / [LCD] / LCD/TV
[OFF] / ON
35