Cleaning The Air Filter - Sony VPL-CS7 Manual De Referencia Rápida

6
Close the lamp cover and tighten the
screws.
7
Turn the projector back over.
8
Connect the power cord. The ON/
STANDBY indicator around the I/1
key lights in red.
9
Press the following keys on the remote
commander in the following order for
less than five seconds each: RESET, b,
B, ENTER.
Note
Do not put your hands into the lamp replacement
spot, or not fall any liquid or object into it to
avoid electrical shock or fire
Disposal of the used lamp
For the customers in the USA
This product contains mercury. Disposal of
this product may be regulated if sold in the
Untied States. For disposal or recycling
information, please contact your local
authorities or Electronics Industries
Alliance (http://www.eiae.org).
Cleaning the Air
Filter
The air filter should be cleaned every 500
hours.
Remove dust from the outside of the
ventilation holes with a vacuum cleaner
when the message "Please clean the filter"
appears in the display.
500 hours are approximate. This value
varies depending on the environment or
how the projector is used.
When it becomes difficult to remove the
dust from the filter with a vacuum cleaner,
remove the air filter and wash it.
1
Turn off the power and unplug the
power cord.
2
Place a protective sheet (cloth) beneath
the projector and turn the projector
over.
3
Remove the air filter cover.

Cleaning the Air Filter

9
GB