Sony VPL-CS7 Manual De Referencia Rápida página 24

Symptom
The image extends beyond
the screen.
The picture flickers.
Indicators
POWER SAVING
TEMP/FAN
LAMP/COVER
I /1 indicator
12
GB
Troubleshooting
Cause and Remedy
• The APA key is pressed although there are black edges around the
image.
c Display the full image on the screen and press the APA key.
c Adjust "shift" in the INPUT SETTING menu properly.
• "Dot Phase" in the INPUT SETTING menu has not been adjusted
properly.
c Adjust "Dot Phase" in the INPUT SETTING menu properly.
Lights up when the projector is in power saving mode.
Lights up when temperature inside the projector becomes unusually
high. Check to see if anything is blocking the ventilation holes.
Flashes when the fan is broken. Consult with qualified Sony personnel.
Lights up when the lamp has reached the end of its life or becomes a
high temperature. Wait for 90 seconds to cool down the lamp and turn
on the power again, or replace the lamp.
Flashes when the lamp cover is not secured firmly. Attach the cover
securely.
Lights in red when a AC power cord is plugged into a wall outlet. Once
in standby mode, you can turn on the projector with the I /1 key.
Lights in green when the power is turned on.
Flashes in green while the cooling fan runs after the power is turned off
with the I /1 key. During this time, you will not be able to turn on the
projector.