Attaching The Camera To This Unit - Sony Party-shot IPT-DS2 Manual De Instrucciones

Attaching the camera to this unit

Before attaching the camera
ˎ
The internal memory and memory card have
sufficient free space.
ˎ
Install a fully charged battery pack into the camera.
ˎ
Turn off the power of the camera.
1 Remove the protective cover.
2 Press the release button (dark gray) of this
unit to open the camera clips.
3 Check the "Attachment" item in the table
of compatible functions (page 4). Turn the
camera to face in the desired direction.
ˎ
Attachment A models according to the
table of compatible models
Position the camera with its lens facing the
SONY logo on this unit.
8-GB
ˎ
Attachment B models according to the
table of compatible models
Position the camera with its LCD screen facing
the SONY logo on this unit.
4 Align the multi connector at the
bottom of the camera with the multi
connector on this unit. Attach the camera
perpendicularly to the tilt arm of this unit.
5 Slide the camera slowly until it is
positioned almost at the center of this
unit.