Preparing The Intelligent Pantilter; Removing The Base; Selecting A Base And Plate; Mounting The Base - Sony Party-shot IPT-DS1 Manual De Instrucciones

Preparing the intelligent pantilter

At the time of purchase, Base A is attached in the tilt arm.
When using the DSC-TX7/DSC-TX7C, you must replace the base and plate
beforehand.

Removing the base

Put your finger on the left side of the base and lift up.

Selecting a base and plate

Align with your camera to select a base and plate.
Camera Base
DSC-TX1
DSC-WX1
DSC-TX7/
DSC-TX7C

Mounting the base

Attaching/Removing the plate

Refer to "Preparing the intelligent pantilter" in the operating instructions.
Plate
a1
A
a2
B b1
5-GB