Sharp XE-A212 Manual De Instrucciones página 13

A212_1 03.7.5 8:00 AM
5.
When not using the take-up spool (using as receipt paper):
• Cut off the excess paper using the edge of the inner cover, and
replace the printer cover. Press the
paper end comes out of the printer cover and clean paper
appears.
If the paper end does not come out, open the printer
cover, and pass the paper end between the paper cutter
and the paper guide of the printer cover, and replace the
cover.
When using the take-up spool (using as journal paper):
• Insert the end of the paper into the slit in the spool. (Press the
key to feed more paper if required.)
• Wind the paper two or three turns around the spool shaft.
• Set the spool on the bearing, and press the
excess slack in the paper.
• Replace the printer cover.
When using a paper roll as journal paper, you must change
the printing style. Refer to "Print Format" in "Various
Function Selection Programming 1" section (Job code 6)
for changing the printing style.
5
Programming date, time and VAT/tax
The cash register provides text languages of English, German, French and Spanish. It is preset to
English. If you want to change the language, you must change it before programming. Refer to
"Language selection" in "Various Function Selection Programming 2" (Job code 88) section for
changing the language.
Before you can proceed with registration of sales, you must program:
• date • time
Please refer to the BASIC FUNCTION PROGRAMMING section for details (page 34).
Page 11
F
key to make sure the
• VAT/tax
F
F
key to take up
11