Displays; Customer Display (Pop-Up Type); Drawer Lock Key - Sharp XE-A212 Manual De Instrucciones

A212_1 03.7.5 8:00 AM
5

Displays

Operator display
Receipt OFF indicator
Repeat / Power save mark
• Clerk code or Mode name
The mode you are in is displayed. When a clerk is assigned, the clerk code is displayed in the REG or
OP X/Z mode. For example, "?01?" is displayed when clerk 01 is assigned.
• Repeat mark
The number of repeats is displayed, starting at "2" and incremental with each repeat. When you have
registered ten times, the display will show "0". (2 © 3 ......9 © 0 © 1 © 2...)
• Power save mark
When the cash register goes into the power save mode, the power save mark (decimal point) lights up.
• Function message display area
Item labels of departments and PLU/subdepartments and function texts you use, such as %, (–) and
CASH are displayed. For the details of function texts, please refer to pages 45.
When an amount is to be entered or entered, "AMOUNT" is displayed: When an amount is to be
entered, ------- is displayed at the numeric entry area with "AMOUNT". When a preset price has been
set, the price is displayed at the numeric entry area with "AMOUNT".
• Numeric entry display area
Numbers entered using numeric keys are displayed here.
Date and time display
Date and time appear on the display in the OP X/Z, REG, or MGR mode. In the REG or MGR mode, press
N
the key to display the date and time.
Error message
When an error occurs, the corresponding error message is displayed in the function message display area.
For details of error messages, please refer to "Error message table" on page 79.
Customer display
(Pop-up type)
6

Drawer Lock Key

This key locks and unlocks the drawer. To lock it, turn 90
degrees counterclockwise. To unlock it, turn 90 degrees
clockwise.
Page 7
Power save mark (Mark only lights up in the power save mode.)
Clerk code or mode name
Function message display area
Numeric entry display area
7