Nokia 2855 Manual Del Usuario página 60

Access no.+card no.+phone
card number (plus PIN if required), then enter the phone number.
Prefix+phone no.+card
number) and phone number, then enter the card number (plus PIN if required).
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name
Select a calling card
You can select one of the calling cards for which you have saved information.
The selected card information is used when you make a card call.
1. In the standby mode, select
2. Enter your security code, and select OK. See "Security," p. 68.
3. Scroll to the calling card of your choice, and select it.
Make card calls
After you have selected a calling card, make a card call.
1. Enter the phone number, including any prefix (such as 0 or 1) that your
calling card may require when you make a calling card call. See your calling
card for instructions.
2. Press and hold the send key for a few seconds until
3. Follow the instructions on the screen.
4. When you hear the tone or system message, select OK.
International prefix
If supported by your service provider, you can store an international prefix into
your phone. When you enter + at the beginning of a phone number, your phone
automatically inserts the international prefix that you have stored.
Store an international prefix
1. In the standby mode, select
2. Enter the international prefix (for example, 011), and select OK.
Use the international prefix
In the standby mode, enter + and the phone number you want to call, for example,
+33934546789.
The phone dials the international prefix you have stored in your phone and the phone
number you have entered. In the example, the phone dials 011.33.9.3454.6789.
no.—Dial the access number for the calling card,
no.—Dial the prefix (numbers that must precede the phone
> enter the card name > OK.
Menu > Settings
Menu > Settings
> Call > Calling card.
Card call is displayed.
> Call > International
S e t t i n g s
prefix.
59