Automate Voice Mail; Set Up Voice Mail With Dialing Codes - Nokia 2855 Manual Del Usuario

M e s s a g i n g
Listen to your voice mail
After you set up voice mail, you can dial the number in one of four ways:
• Dial the number.
• Press and hold 1.
• Select Listen if there is a notification on the display.
• In the standby mode, select
voice messages.
When you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.

Automate voice mail

Voice mail services vary by service provider. The following instructions are
examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Write down number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Note
that each voice mail service may vary. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and
press *.
Be precise; you will need this information in "Set up voice mail with dialing
codes," p. 36.

Set up voice mail with dialing codes

1. In the standby mode, select
2. Scroll to an empty 1-touch dialing slot, and select Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes, and enter any codes as necessary. Use the information
that you saved from "Write down number and process," p. 36.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp. For more
information on dialing codes see "Insert dialing codes," p. 42.
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.
36
Menu > Messaging
Menu > Contacts >
> Voice messages >
1-touch dialing.
Listen to