Voice Commands; Activate A Voice Command - Nokia 2855 Manual Del Usuario

S e t t i n g s
Fixed—Use to send tones of the duration you specify in the
Off—Use to turn off tones. No tones are sent when you press a key.
Set length
You can specify touch tone length when using the
In the standby mode, select
tone length > Short
Start-up tone
If the Start-up tone
the standby mode, select
Help text activation
Your phone displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 15 seconds and wait for the help text to display.
Scroll to page through the full help text, if necessary.
The default setting for help text is on. However, you can turn help text on or off.
In the standby mode, select
On or Off.

■ Voice commands

You can set up to five
certain phone features.
Add a voice tag
Before using Voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select
2. Select a function option you wish to tag, and select Add.
3. Select Start, and speak the voice tag clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The phone replays then saves the recorded tag.
option for which you add a voice tag.

Activate a voice command

After you have associated a voice command tag with a phone function, you can
issue a command by speaking the voice command tag.
1. In the standby mode, select and hold Names.
2. When Speak now
62
Menu > Settings
(0.1 seconds) or Long
is activated, the tone sounds when you turn on your phone. In
Menu > Settings
Menu > Settings
Voice commands, which allow hands-free operation of
Menu >
appears, pronounce the voice tag clearly into the microphone.
Touch tone length
Fixed option.
> Phone > Touch tones
(0.5 seconds).
> Phone > Start-up tone
> Phone > Help text activation
Settings > Voice commands.
appears next to the function
option.
> Touch
> On or Off.
>