Stand Drilling; Drilling Outdoors; Machine ' S Safety Equipment - Husqvarna DM 230 Manual De Instrucciones

Handheld drilling
WARNING! Do not perform handheld
!
drilling in first gear as the machine has a
powerful torque that can result in
personal injuries should the drill bit jam.
• Always use a drill bit with a max. diameter of 75 mm
with handheld drilling. The larger the drill bit the
greater the reaction if the drill jams.
• Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool live and could
give the operator an electric shock.
• Always make sure you are standing firmly when
carrying out handheld drilling.

Stand drilling

• Always use a drilling stand if drilling is to be performed
from a ladder or scaffold.
SAFETY INSTRUCTIONS
• Handheld drilling in these situations is full of risks, as
the risk of falling is very high if the drill bit jams.
• Make sure that the stand is secured correctly.
• Make sure that the drilling machine is secured
correctly in the stand.

Drilling outdoors

• Always use extension cables that are approved for
outdoor use.
Drilling in ceilings and the like
• Use a water collector to avoid water penetrating into
the machine. The machine must be covered with
plastic or the like in order to prevent water penetrating
into the machine, but do not cover the air intakes and
air outlets.
IMPORTANT! The air intake must not be covered.
Machine' ' ' ' s safety equipment
This section describes the machine's safety equipment,
its purpose, and how checks and maintenance should be
carried out to ensure that it operates correctly. See the
"What is what?" section to locate where this equipment is
positioned on your machine.
WARNING! Never use a machine that has
!
faulty safety equipment! Safety
equipment must be inspected and
maintained. See instructions under the
heading Checking, maintaining and
servicing the machine's safety
equipment. If your machine does not
pass all the checks, take it to a service
workshop for repair.
–
English 9